Used Equipment
Industrial Washers
Powder Coating
Industrial Ovens
|
All used equipment we currently have for sale
is listed below.
Click on the photo (if available) to view a larger version.
| Item |
Price |
| E-Coat Systems |
 |
Line Two; Heavy Duty E-Coat System
This line is made for doing large, heavy parts, and comes with a hydraulic lifting arm for loading parts on and off the conveyor. The conveyor system is 6" I-beam, and the e-coat system itself will take a part approximately 4'6" wide, and 5' deep. This is a complete unit with ovens, rectifiers, ultra filtration units, etc. This is an indexing type of system, but it is a monorail. This equipment is available at any time. Call for details, come look at this system soon, it won't last long.
|
Contact Us |
 |
Extraordinarily Clean E-Coat System
Finishing Machine has been selected to sell two e-coat systems that are both in extraordinarily good condition. Below you will find descriptions of the work opening, line speed, cycle times, temperature, etc. The system is now working, but will be available for dismantling sometime around January 1st. If anyone is interested, please call for an appointment or to have any questions you may have answered.
CONVEYOR DATA:
4 #458 MONORAIL I-BEAM SYSTEM
WHEEL SPACINGS: 24 CENTERS
DESIGN LOAD: 75 LBS / FT
DESIGN SPEED: 20 FPM
SPEED RANGE: 12 TO 20 FPM
OVERALL CONVEYOR
PRETREATMENT THRU POST RINSE 427 21 MIN. 21 SEC.
OVERHEAD CURE OVEN 641 32 MIN. 3 SEC.
WORK AREA (OVEN EXIT TO WASHER) 326 16 MIN. 18 SEC.
TOTAL CONVEYOR SYSTEM 1,396 1 HR. 9 MIN. 48 SEC.
WORK OPENING IS 6 TALL AND 5 WIDE. ALL STAGES ON SYSTEM ARE CONSTRUCTED OF STAINLESS STEEL.
|
Contact Us |
 |
PAL Cathodic E-coat Overhead Rack-Hoist System
see picture / specs
|
Contact Us |
| Industrial Ovens |
 |
DriQuik Gas Infrared Oven
Specifications:
480 VAC, 3 PH, 60HZ
BTUS 450,000
FULL LOAD CURRENT: 28.2AMPS 15KW
DISCONNECT RATING: 60AMPS
EQUIPMENT MODEL: #12-CG15X60
SERIAL# 9125-497
DATE OF MANUFACTURE: 4/97
GAS CATALYTIC VERTICAL OVEN---three CG15-60 DriQuik industrial sections high by two CG15-60 DriQuik industrial sections long. 9 long pallet tray load section, 10 long oven, 9 discharge section.
EXTERIOR: 1-5/8 x 1-5/8 12 gauge Unistrut structural steel finished in green hybrid powder coat.
CATALYTIC BURNERS are approved by Factory Mutual for use in Class 1, Division 2, Group hazardous areas, and the Canadian Gas Association (CGA) has approved usage in Class 1, Division 1 and 2, Group D hazardous areas.
POWDERED CONVEYOR through oven (12 fpm) with overhead door at the entrance to the oven chamber and vinyl strip curtain at the discharge end. Conveyor is designed for pallet loads on metal trays (3 trays with unit). Three pallet trays, 28 long triple chain conveyor.
OVEN RECIRCULATED AIR SYSTEM: One variable speed 12 in. dia. paddle type plug fan rated at 2000 to 6000 cfm and ½ in. static pressure. Blower system contains 5hp premium efficiency motor with hi-temp capability. A VFD controller is located in the control cabinet.
OVEN CONTROL SYSTEM: One NEMA 12 rated CSA Approved oven control cabinet, designed for floor mounting. Control cabinet contains the necessary 30 amp main disconnect switch, contactors, fuse blocks, transformer, and motor starters for proper oven control. An Allen Bradley SLC 5/01PLC diagnostic control system will automatically control all startup and safety features, as well as control the two separate temperature control zones.
|
Contact Us |
 |
Many Ovens
There are approximately 10 ovens in this facility. Most ovens are 6" oven panels that are in excellent condition. Many many burner boxes that are equipped with Maxon oven packs. Thousands of feet of duct work. Finishing Machine can sell the ovens where-is, as-is, re-engineered to fit your specific needs, or any combination. This is an opportunity to get a first class oven at an extreme discount.
|
Contact Us |
| Industrial Washers |
 |
Stainless Belt Washers
Basic Description for each washer
Design speed .................................. 4 FPM
Speed Variable from ...................... 2 to 6 FPM
Width of conveyor belt ..........................24"
Height clearance ................................24"
Conveyor belt capacity...................... 25 lbs/ft2.
2000 lbs. Maximum Total on Belt
Loading station Length........................................ 42'
Loading height.................................37
Entrance vestibule length and steam hood....................................... 4.5
First stage length........................... 8'
Transfer section length ..................... 5'
Second stage length ......................... 4'
Exit vestibule and Blow-off section length .......4.5
Unloading station length ....................... 4'
Exhaust blower quantity..................................... 2
Exhaust blower capacity (each) ..........1000 SCFM @ 1" S.P.
Exhaust blower motor (each) ..................1.0 HP/TEFC
Estimated shipping weight ........... 23,000 lbs.
First Stage
Exposure time .............................. 2 min.
Operating temperature.................... 140 - 180° F
Tank capacity ..........................1,500 USGAL.
Heating capacity......................800,000 BTU/hr.
Pump capacity.................... 360 USGPM @ 70 PSI
Pump motor..................... 25 HP / 3600 RPM / TEFC
Second Stage
Exposure time ................................ 1 min.
Operating temperature...................... 140 - 160° F
Tank capacity ........................600 USGAL.
Heating capacity.....................800,000 BTU/hr
Pump capacity......................... 245 USGPM @ 60 PSI
Pump motor........................ 15 HP / 3600 RPM / TEFC
Air Blow-Off
Blower capacity ....................300 SCFM @ 70 W.C.
Blower motor ..........................7.5 HP / TEFC
Number of air knives ...........Two, one above and one below the belt
Noise level @ 1 meter..................85 90 dBa, T.W.A.
(dependant on part shape & belt speed)
|
Contact Us |
| |
Five Stage Stainless Steel and Poly GAT Washer
This system is 10 years old and has a quite large 8' wide by 7' tall work opening. Designed line speed up to 11 feet per minute. The washer has stainless steel tanks with a Lexan canopy. It was originally built by GAT and is up and operating at this time. It also comes with three Nordson spray booths, five seives, several color modules, three handguns per booth, UV detection, etc. The dry-off and baking oven are both in excellent condition and it has a six inch I-beam conveyor. Approx. 1000 feet. This is available immediately. Pictures available soon.
|
Contact Us |
 |
Two Stage Wash System
100% Stainless Steel construction. The two stage wash system includes two wash booths and two storage tanks made of stainless steel construction. Each booth has 96 nozzles for complete coverage. The dimensions for the tanks and booths are:
Booths: 111" tall x 66" wide x 72" length
Tanks: 782 imperial gallons
One tank has a heat exchanger to bring the chemicals up to temperature. 2 million BTU Natural gas fired. It has an Eclipse burner with an Alison ignition system. Brook & Hanson high efficiency pumps, one exhaust fan. The wash system is controlled by touch screen display which can be run manually or automatically. A few miscellaneous items are included.
|
contact us |
 |
Washers
Five identical conveyor type washers for sale. Good
condition, presently in production. The washers are (5) years old, mild steel. Heat source is hot
water. Work opening is 12" x 60". Conveyor speed is 0 to 6 fpm. We will have a small 2.5 million BTU water heater available when
these units are removed.
|
$20,000 each |
 |
Washer
SVS 3-STAGE PARTS WASHER, 48 W STAINLESS STEEL MESH CONVEYOR BELT, OPENING 48 W X 18 H, 45 LONG TUNNEL.
|
contact us |
 |
Three Stage Washer
1. The over all length is approx. 30 ft long, by 8 ft wide.
2. The part opening is 3' x 5' (could be opened to 6' high)
3. The upper shroud and drain pans are stainless steel
4. The tanks are carbon steel
5. The line speed is 5-6 fpm
6 Stage #1 is 10 ft. long (11 risers), 15 HP pump 330 GPM, 2 million BTU Maxon "Tubo Therm" burner with 6" burner tube.
7 Stages 2 & 3 are 3 ft long (4 risers ea.) 5 HP pumps 186 GPM, ambient
8. Two, 18" exhaust fans
9 Upper shroud split top with brush seal (conveyor runs above the washer out of the spray)
10 Approximate age 8 yrs only used lightly for 5 years.
|
Contact Us |
| Other |
| |
Air Make-Ups
We have many air make-ups available, ranging from 8,000 to 50,000 cfm.
|
contact us |
| |
Miscellaneous Electrical items and controls
Electrical items for control panels, Honey-well Controls, High Limits, Fuse blocks, starters, timers, etc.. Like New!
|
Contact us |
 |
Conveyor Systems
There are literally thousands and thousands of feet of Unibilt conveyor. Both inverted power and free, straight-powered conveyor, and overhead power and free. Thousands of bucks for carrying parts, along with trolleys, and carriers for power and free. All the conveyor in this plant appears to be like new.
|
Contact Us |
 |
Wastewater Treatment System
This is a complete working wastewater treatment system, that has the capacity to do two large e-coat systems.
|
Contact Us |
| |
1500 feet of X458 Short-drop Conveyor
With drive, wheel turns, elevation changes, etc. We also have 1500 feet of long-drop chain with one drive unit, elevation changes, and wheel turns. All equipment in excellent condition.
|
Contact Us |
 |
Powder Coating Guns
Nordson automatic Tribo 8 guns and one hand touch up gun
|
$5000 |
| |
Burners and Gas Trains
We have available several Maxon oven packs and Eclipse burners for ovens of different sizes. They all have IRI coded gas trains and are ready to go to work.
|
Contact Us |
| Painting Systems |
 |
3 Stage Washer Dry Oven / Cure Oven
I Beam Conveyor SystemPowder Coating Booth
The Equipment Design Parameters are as follows:
Conveyor System: 3 I-Beam Track
Conveyor Line Speed: 8 FPM
Profile Opening: 4-4 Wide x 7-2 High
Maximum Part Size: 3-4 Wide x 6-2 High x 6-0 Long
Operating Temperature: Pre-Heat and Bake 350 F - 450 F
Oven Time: Dry Off 11 Minutes @ 8 FPM
Cure 24 Minutes @ 8 FPM
Voltage: 460V-3PH-60
Fuel: Natural Gas, 2 NPT
2 - 5 PSI Required
3 STAGE WASHER
1. The Washer is Approximately 44 0 Overall Length, Including Entry And Exit Vestibules. This Includes (3) Individual Stages For Cleaning/ Phosphate, Rinse And Seal Rinse With Drain Sections Between Each Of The Tanks.
2. Each Tank Has A Horizontal Pump, Stainless Steel Filter Screens, Collection Tank, Drain, And Make Up Valves
3. Stage 3 has a Inline Canister Filter unit (3 Round x 4 Tall)
4. Stages are Equipped With Risers On 12 Centers, Cleaning Nozzles On Approximately 12 Centers Vertically, All Risers And Distribution Piping Are Schedule #80 CPVC. Piping From The Pump To The Header is Steel Tube.
5. Exhaust Fans Are At Each End Of The Washer
6. Each Stage Has Independently Removable, Double, Stainless Steel Filter Screens Near The Pump Intake Area With A Retractable Dam.
7. Washer Tanks and Tunnel Are Mild Steel.
8. Access Lids Provided In The Top Of The Tanks
9. Tunnel Access between Stages
10. All Pumps are Centrifugal Type With Flexible Spider Coupling Connection To An 1800 Rpm, TEFC, Motor. Pumps Are All Iron Construction.
11. Walkways And Covering are Above Water Surface:
DRY / CURE OVEN DESIGN & CONSTRUCTION
1. The interior dimensions of the oven shall be approximately 46-0 Long X 39-0 Wide X 13-0 High. The oven is designed to operate at 350 F with a Top Range of 450 F.
2. The Cure conveyor line makes 4 passes through the structure for a dwell time of 24 minutes.
3. The Drying conveyor line makes 2 passes through the structure for a dwell time of 11 minutes.
4. The oven will be supplied with two (2) heater houses, complete with burners, recirculating fans, as well as the necessary temperature, safety and electrical controls to operate the oven.
5. The burners are Oven-Pak type with FM gas trains and flame safety equipment.
6. The Oven is designed for exterior construction with a steel frame supported by Post. The floor and walls are assembled on this frame. An exterior metal skin is attached to the exterior oven wall. The Heater houses are enclosed with a rear access door for servicing.
CONVEYOR SYSTEM
The overhead conveyor system is 3 I-Beam Track. The general components of the conveyor system are outlined below. Final details and exact components to be determined based upon final system configuration.
Approximately 650 ft. of Chain
1 (One) Spring-loaded Take Up
1 (One) Caterpillar Drive Unit
6 (Six) Oven Expansion Sections
Inclines and Declines as needed
6 (Six) 90 degree turns
4 (Four) 180 degree turns
Floor Mounted Steel Supports
Variable Speed Controller
Auto Lubricator
Overhead Basket
POWDER BOOTH
The general components of the booth are outlined below:
GEMA BOOTH
STAINLESS AND POLY CONSTRUCTION
OPENING 46 WIDE X 84" HIGH
24 LENGTH
POWDER RECLAIM and CONTAINMENT SYSTEM
(2) AUTOMATIC GUN OPENINGS
(4) MANUAL OPERATER OPENINGS
(2) 5,400 CFM CARTRIDGE COLLECTOR WITH AFTER FILTER
|
Contact Us |
 |
BOOTH, FLASH TUNNEL AND OVEN
One large spray booth that can do vehicles up to and including vans and small trucks. The unit appears to be in excellent condition and comes equipped with explosion proof lights, exhaust fans, all controls, doors on each end. It also has a secondary heated area to assist in the drying of any painted vehicles. All exhaust stacks, heating elements, etc. are included. This unit is still erected and can be seen at your convenience. Please call for pricing and to set up a time to view the equipment.
|
contact us |
| Powder Coating Systems |
 |
Wagner Powder Booth
1. The part opening is 38" w x78" h
2. Two hand gun openings, 30" x 48"
3. Two auto gun openings 7' h x 6" w
4. Automatic flame detection
5. Over all length 25'-0"
6. Width over all 16'-0"
7. Height 11'-0"
There are no guns with this booth. Condition very good. If painted condition would be excellent.
|
Contact Us |
 |
Powder Booth
Nordson 3 x 5 work opening, approximately 20 feet long. With cartridge collection. There are no controls for this unit, but it does have an Azo seive and powder hopper.
|
$5000.00 |
 |
Chain on Edge Powder Machines
Chain on edge powder machines have just become available.
First is a 1998, Nordson 504-COE, Guns 3 model APG2000, exhaust fan 152 fpm, fire detection sensor. Oven=2700 spindles, chain 900 ft., natural gas 1-5 psig, 1600 scfh @ 1000 btu / scf, 1,600,000 btuh, max temp 600 F. Recir 25,000 cfm, exhaust 1202 cfm @ 1.5 hp.
Second is 1997 Brinks Booth, Guns 3 Model APG2000, exhaust fan 152 fpm, fire detection sensor, oven = 2700 spindles, chain 900 ft., natural gas 1-5 psig, 1600 scfh @ 1000 btu / scf, 1,600,000 btuh, max temp 600 F. Recir 25,000 cfm, exhaust 1202 cfm @ 1.5 hp.
Third is a powder coat system with one booth and two ovens. 1999. Brinks Booth, Guns 4 Model APG2000, Exhaust fan 150 fpm, fire detection center. Oven = Natural gas 1-5 psig, 1600 scfh @ 1000 btu / scf, 1,600,000 btuh, max temp 600F. Recir 25,000 CFM, Exhaust 1201 CFM @ 1.5 hp. Chain #1 = 2550 spindles and 800 ft. Chain #2 = 2500 spindles and 800 ft.
Should have pictures soon.
|
contact us |
 |
Nordson Econocoat Booth
Nordson Econocoat Booth, used for approximately one year. In excellent condition. Including two handguns, two power packs and cables, powder hopper, lights, man door, and cartridge collection.
|
$18,500 |
 |
Wagner Powder Coating Booth
WAGNER MODEL ICF-8000 PASS-THRU AUTOMATIC STAINLESS STEEL
POWDER COATING BOOTH
COMPLETE SYSTEM
BARELY USED, VERY CLEAN
IINCLUDES:
(4) GUNS
DIGITECH-SYSTEM, SPANNUNG VOLTAGE: 85-250VAC/47-440 Hz
WAGNER CCM 2007
WAGNER GCM 2007
(4) WAGNER EPG 2008
Dimensions:
length: approx: 12'
width: approx: 10'
Height: approx: 10'
|
$38,500 |
 |
Two Nordson Powder Booths
We have two booths, both are the Nordson 2000. Both booths are manual
spray gun but can be change to automatic spray guns. Both units are complete.
The openings are 6' 3'' tall by 4'wide. The opening starts at 27'' off finish floor. The gun opening are 5' by 291/2'' and a door that closes to make it 3' by 291/2''.
The booths have one roll away color module and feeder and the whole thing rolls on and off line by track and wheels.
There will be two guns per booth, some gun spare parts, two gun controllers, two spray booth platform that can be rolled back and 4 or 5 filters. We have a spare motor that will go with the first booth that is purchased. If you have any more questions please contact us.
|
$55,000 each |
|
|
